Skip to main content

PolyDADMAC Center

How much PolyDADMAC should be diluted?

  • By:
  • 2 Views

The dilution ratio for PolyDADMAC depends on the specific application and the equipment being used, but there are standard industry guidelines to ensure optimal performance and prevent localized high concentrations.

1. Standard Dilution Concentration
When used alone, PolyDADMAC liquid concentrate should typically be diluted to a working concentration of 0.05% to 5% (based on solid content) before being added to the water.

  • For many general applications, a dilution range of 0.1% to 0.5% is highly recommended to facilitate uniform mixing.

  • For some filtration applications, dosages can be as low as 0.2 to 2 ppm, while broader wastewater clarification might require 1 to 10 ppm.

2. Why Dilution is Crucial
Diluting the product before use is necessary because it facilitates uniform mixing. Injecting the concentrate directly can cause localized high concentrations, which may lead to performance fluctuations or poor floc formation.

3. Important Operational Guidelines

  • Water Temperature: When preparing the dilute solution, the water temperature should be controlled between 10°C and 40°C.

  • Mixing: Sustained, moderate stirring is required to ensure the polymer is evenly distributed without breaking down the formed flocs.

  • Dosing: It is generally better to dose the diluted product continuously.

4. Finding the Optimal Dosage
Because the required dosage depends heavily on the specific characteristics of the water being treated (such as turbidity, pH, temperature, and contaminant concentration), the most economical and effective dosage should be determined through a jar test. This involves preparing multiple samples with varying concentrations to observe floc formation and settling rates.