Yes, absolutely. PolyDADMAC is highly soluble in water and is specifically designed to be used as an aqueous solution.
Depending on the physical form of the product, the dissolution process is as follows:
Liquid Form: It is already dissolved in water. The commercial liquid concentrate (which typically has a solid content ranging from 10% to 50%) can be easily mixed with water at any ratio to prepare the desired working solution.
Solid Form (Powder/Flakes): If you are using the solid form (which has a high solid content of ≥92%), it will dissolve completely in water to form a true, clear solution. Under normal conditions, the solid product can fully dissolve within 10 minutes.
💡 Practical Tips for Dissolving:
Water Temperature: It is recommended to use cold or warm water (typically between 10°C and 40°C) for dissolving or diluting.
Mixing: Continuous and moderate stirring will help the polymer distribute evenly and speed up the dissolution process.
Avoid Over-mixing: Once fully dissolved, avoid high-shear mixing for extended periods, as this can degrade the long polymer chains and reduce its flocculation efficiency.
